Description
Rapid setting, high strength, fibre reinforced,
shrinkage compensated waterproof mortar
for structural repair and reinstatement of
concrete. CE marked in accordance with
BS EN 1504-3 Class R4.
Uses
Durable repair of concrete subject to heavy
wear such as roads, runways, bridges,
decks, floors and footpaths. Suitable for
repair methods 3.1, 3.2, 4.4, 7.1, 7.2 as
defined by BS EN 1504-3. When bulked
out produces a pourable mortar or microconcrete especially for potable water
applications.
Benefits
Incorporates the latest proven cement
chemistry, microsilica, fibre and styrene acrylic copolymer technology.
- Pre-packaged material only requiring mixing with water on-site. Can be bulked
out with sand or aggregate. - Rapid strength development, even at
sub-zero temperatures. Allows early return to service. - Sets in 10 minutes at 20°C yielding a durable, high strength mortar.
Fastfill – Structural Repair Mortar - Repairs can be walked on in 1 hour, and
subject to vehicular traffic in 2 hours. - Ideal for use in tidal applications due to rapid
setting properties. - High bond strength exceeds tensile strength of concrete, ensuring monolithic
performance of the repair. - Portland cement base.
- Dense matrix resists 10 bar water pressure.
Very high diffusion resistance to acid gases and chloride ions. - Resistant to a wide range of chemicals. Sulphate resistant to class DS-5/5m of BRE, Special Digest 1 and ideally suited for
sewage and wastewater applications. - Non-toxic when cured and listed asauthorised under Regulation 31 for use in
the supply of drinking water. - Economic mortar requiring no substrate or inter-layer priming. Part bags can be mixed.



