home | about us | hire | sale | technical | K-FORM | downloads | contact us | vacancies
 
 

Formwork Accessories

Dywidag Tie Rod

A standard tie rod specifically designed for use with formwork. For all types of concrete structures. Cutting service available.

 

 





 

 




CODE ITEM FAILING LOAD WEIGHT Kg STOCK LENGTHS
DY15 Dywidag 15 195 kn 1.55 6.0m
DY20 Dywidag 20 345 kn 2.50 12.0m
DY26 Dywidag 26.5 568 kn 4.50 12.0m
 
 

Inform Tie Rod

A continuous all round threaded tie rod, which is weldable and can also be used to form pigtails, hooks, loops etc. Cutting service available.

   
CODE ITEM FAILING LOAD WEIGHT Kg STOCK LENGTHS
B15 Inform 15 165 kn 1.55 6.10m
B20 Inform 20 300 kn 2.60 6.35
B26 Inform 26 510 kn 4.60 6.30

 
 

Wing Nut

A ‘knock on’ wing nut used in conjunction with waler plates for securing tie rods in formwork applications.

   
CODE ITEM WEIGHT Kg
WN15B Wing Nut 15mm 0.36
WN20B Wing Nut 20mm 0.40
WN26B Wing nut 26mm 0.90
 
 

Waler Wing Nut

A combined waler plate and wing nut
for 15mm tie rod.

Ideal for use with steel soldiers. Finish: anti-rust.

   
CODE ITEM O mm WEIGHT Kg
WWN70 Waler Wing Nut 70 70 0.58
WWN100 Waler Wing Nut 100 100 0.70
 
 

Waler Plate - Pressed

Used with the knock on wing nut. Ideal with timber and steel soldiers.

   
CODE ITEM WEIGHT Kg
WPB Pressed Waler Plate 120x120x10 1.30
 
 

Waler Plate - Plain

A plain flat mild steel plate washer.
For use on Formwork applications

   
CODE ITEM WEIGHT Kg
WP12B Plain Waler Plate 120x120x12 1.30
WP20B Waler Plate 120x120x20 2.30
WP26B Waler Plate 150x150x30 5.38
 
 

Hexagon Nut

Suitable for all 15mm tie bars and for use in situations where access is restricted. Ideal for use by pre -casters and mould makers.

   
CODE ITEM WEIGHT Kg
HN25 Hexagon Nut 15 x 25mm 0.10
HN50 Hexagon Nut 15 x 50mm 0.21
HN206 Hexagon Nut 20 x 60mm 5.00
HN26 Hexagon Nut 26 x 85mm 8.00
 
 

Connection Nut

Used for joining tie rods. Complete with centre stop to ensure equal spacing of tie bar inside the connector.

   
CODE ITEM WEIGHT Kg
CS Connection Nut 15 0.46
CS20 Connection Nut 20 0.65
CS26 Connection Nut 26.5 1.40
 
 

Ribbed Connector - Water Barrier

An economical cast dual purpose water
barrier/connection nut.

   
CODE ITEM WEIGHT Kg
CSR Ribbed Water Barrier/Connection Nut 0.5
 
 

Water Barrier - Flanged

Used in water retaining structures. Cast into the concrete wall between two separate tie bars. After pouring, tie rods are removed, the water barrier remains in situ. Allow two reducers per water barrier.

   
CODE ITEM WEIGHT Kg
WBK Water Barrier 0.55

CODE ITEM PACK SIZE
BWC Reducer 250

 

 
 

Water Barrier - Plated

Cast into the concrete wall between two tie bars, they allow ‘thru tie systems’ to be used in water retaining structures. Available with a 120mm x 120mm indent - ed plate for maximum efficiency or as a plain metal sleeve, where access between reinforcement bars may be difficult.

   
CODE ITEM SIZE mm WEIGHT Kg
WB Water Barrier 15 120 x 120 0.60
WB20 Water Barrier 20 Plate 120 x 120 1.15
 
 

MKK Cone

Used when heavy duty tie rods or anchors have to be left in the concrete and for climbing applications. Cones are removed with a special spanner.

   
CODE ITEM DIM a mm DIM b mm O d mm O c mm A/F mm Wt Kg
MKK15 MKK Cone
15
95 50 61 40 27 0.50
MKK20 MKK Cone 20 126 65 42 70 32 0.77
MKK26 Mkk Cone 26.5 135 70 57 103 46 1.70
 
 

SKK Cone

The SKK steel climbing cone can be used in conjunction with 15mm tie bar
and a M 24 bolt. It can be used where ever the MKK 15 was used as the leading cone. The SKK 15 is tightened
and released with the special SKK spanner. (Details on application).

 
 
CODE ITEM WEIGHT Kg
SKK15 SKK Cone 1.27
SKKS Spanner 2.5
 
 

Steel Cone

Re-usable steel cone for use when the tie rod or anchors are to be left embedded in the concrete.

 
 
CODE ITEM WEIGHT Kg
TL15 Re-Usable Steel Cone 15 0.65
TL20 Re-Usable Steel Cone 20 0.95
 
 

Spring Clamp

A fast and effective method for securing wire tie rods in light formwork applications. The tension tool is used to pull the wire tie bar through the clamp.

 
 
CODE ITEM WEIGHT Kg
SC Spring Clamp 0.47
TT Tension Tool 3.43
 

 

 

Download Formwork Accessories printable version

View complete Sales catalogue